玩具沖擊測試方法
Test Method for Toys Impact Tester
1. 玩具沖擊測試目的：建立玩具產品強度之測試方法去模仿兒童使用和可預見濫用玩具或其他用品所引致的可能性傷害。
1.Purpose for toys impact tester:Use impact strength test methods to simulate a child playing or abusing toys or other items to determine the possibility of injury.
2.玩具沖擊測試使用設備：
3.1.一塊水平的鋼板.
3.2.金屬重塊—質量為1±0.02kg,分布面積是直徑為80±2mm的金屬重塊.
3.3.刻度尺--可測到200mm的刻度尺.
2.Toys impact tester apparatus including :
2.1 level steel 1 pcs
2.2 Metal weights - 1 ± 0.02kg weight, diameter:80 ± 2mm
2.3 Scale – measured range 200mm.
3.玩具沖擊測試測試方法：
3.1.樣辦預備：測試前每個試驗品應放置在溫度為20-250C相對濕度為20-70％的環境條件下至少4小時.
3.2.玩具沖擊測試測試程序:
3.2.1.將試驗品以最薄弱的位置放在水平鋼表面上,將金屬重塊從100±2mm的高度跌落到測試樣辦上.
3.2.2.重復4.2.1測試1次.
3.2.3.檢查樣辦有無小物體、利角、利邊或危險的驅動機構。
3.Test Method for toys impact tester:
3.1.Specimen prepare: Before the test, each sample run should be placed at such environment condition of a temperature 20-25 ℃, relative humidity 20 ~ 70% for at least 4 hours.
3.2.Procedure for toys impact tester:
3.2.1. Put the weakest point of the sample on the steel surface,doping the metal weights on the test sample from 100 ± 2mm height .
3.2.2. Repeat the test as 3.2.1 one time more.
3.2.3.Check test sample whether it has the small objects, sharp corners, sharp edges or any dangerous parts.
4.玩具沖擊測試參考文件：EN71—1 8.7條
4. Standard Reference for toys impact tester: EN71-1 8.7 section
華科東尼儀器專業生產和研發家具測試儀器、家具測試儀器，家具檢測儀器，家具檢測設備，玩具測試儀，玩具檢測儀器，玩具測試設備等，均符合，BIFMA、ASTM、DIN、EN71、GB、ISO、AATCC等標準，提供全面的實驗室整體解決方案。
Dongguan Hust Tony Instruments focus on design and manufacturing the lab testing machines including furniture testing equipment,chairs and table testing machines, sofa testing equipment, indoor and outdoor furniture testing machines, office chairs testing instrument, toys testing machines,toys test equipment, toys testing tools, toys test apparatus, all the testing machines are designed and produced base on the standards of BIFMA、ASTM、DIN、EN71、GB、ISO、AATCC etc. We supply the complete solution of laboratory testing.
|
